It can do single or dual sided laminating with films 0 - 8mm thick. The high quality chrome and silicone hot rollers can evenly distribute the heat that will ensure high quality lamination. It can be operated automatically or through foot control switch. It is an excellent laminating machine for print shops, graphics studio and professional offices. Heating Method:Steel roller internal heating Speed: Adjustable 3 - 16 ft(1-5M)/ min per minute Maximum Laminating Width:14.17" 360mm Maximum Laminating Thickness:0-0.31" (8mm) Laminating Type:single or dual sides Power Supply:110 V/60Hz (One side 1.1KW, two-sided 2.2KW) Warm Up Time:about 1 minutes Laminating Temperature:0-160°C Operation modes:auto or foot switch control Motion settings:forward, reverse and pause Machine Dimensions :25.59''x 20.47'' x 20.87 (650 x 520x 530 mm) Net Weight:88Lb (40Kg).All metal construction for heavy duty commercial and professional uses. Top and bottom heating rollers controlled separately to allow single or dual sided laminating.
Single or continuous sheet feed. Support 3" core; can also support 1" core with width 12 or less. Adjustable tension on film rolls.Adjustable temperature control in Celsius. Foot/Automatic control could be changed convenience. High quality all steel roller, making laminating effect more satisfactory. Single side and double side laminating can be changed easily. 8 advantages than common laminating.
1, Capable of subsequent processing such as coated by UV film, stamping press etc; Common laminating is not. 2, Can bend even fold, less to delaminate. 3, Can write in ball-point pen on the surface if laminated by matt film; Common laminating is not. 4 Mainly applied to coating color spray paper, photo paper, uncoated paper and uneven art grain paper; common laminating is just applied to even uncoated paper. 5, 3 type soft roll films: Glossy Matt and Pattern.6, Fit for continues operation, enhance assembly effectiveness. 7, The supply cost is lower than common laminating.
8, With thermal glue, non-overflow after cold, product cut is clean and neat; Cold laminating is not, the cut will become black and dirty if the glue overflow.